Yellow Rain Coat Womens
Yellow Rain Coat Women's
This women's yellow rain coat is engineered for industrial and field operations requiring high visibility and reliable weather protection. Constructed from 100% polyurethane-coated polyester with taped seams, it provides a hydrostatic head rating of 5,000 mm, ensuring resistance to prolonged rainfall and wind-driven moisture. The fluorescent yellow (Pantone 803 C) meets ANSI/ISEA 107-2020 Class E background material standards for daytime conspicuity, while 2-inch silver reflective tape on the sleeves, torso, and hem enhances nighttime visibility under low-light conditions. Designed for layering over workwear, the coat features a relaxed fit with articulated sleeves and a two-way front zipper protected by a storm flap with hook-and-loop closure.
Material Composition and Performance Characteristics
The outer shell uses 150D polyester filament yarn with a 0.15 mm polyurethane coating on the interior surface, delivering a tensile strength of 45 N warp and 38 N weft (ASTM D5034). The coating provides resistance to common industrial contaminants including mild acids, alkalis, and oils, with no degradation observed after 24-hour immersion in 10% sodium hydroxide solution. Breathability is achieved through micro-perforations in the coating layer, resulting in a moisture vapor transmission rate (MVTR) of 2,800 g/m²/24h (ASTM E96), reducing interior condensation during moderate activity. All seams are sealed with 15 mm wide polyurethane tape using heat-bonding equipment calibrated to 180°C, preventing capillary leakage at stitch points.
Design Features for Functional Use
The coat includes a three-piece hood with adjustable drawcords and a laminated visor to maintain peripheral vision in rain. Underarm ventilation eyelets (6 mm diameter, 4 per side) are protected by hydrophobic mesh to block water ingress while allowing heat dissipation. Two lower front pockets feature vertical zippers with storm flaps and drainage grommets at the base to prevent water accumulation. Interior details include a drop-in phone pocket on the left chest and an internal hanging loop at the neck collar. Cuffs are adjustable via snap closures with three positions, accommodating gloves or bare wrists. The hem includes a rear drawcord with cord locks to adjust tension and prevent flapping in wind.
Typical Applications in Industrial Environments
This rain coat is commonly used by utility workers performing overhead line maintenance in wet conditions, where visibility and freedom of movement are critical. Municipal road crews rely on it during storm drain inspection and pavement repair operations, benefiting from the combination of high-visibility background material and reflective trim. Agricultural technicians applying pesticides or conducting field surveys in humid climates use it as a barrier against liquid splash while maintaining breathability. Emergency response teams deploying in flood zones or hurricane aftermath scenarios select this garment for its rapid donning capability and compatibility with harnesses and tool belts. It is also suitable for outdoor event staff managing crowds or equipment in variable weather, where durability and cleanability are required.
Size Range and Fit Specifications
| Size | Chest (cm) | Sleeve Length (cm) | Back Length (cm) |
|---|---|---|---|
| XS | 86–91 | 58 | 76 |
| S | 92–97 | 60 | 78 |
| M | 98–103 | 62 | 80 |
| L | 104–109 | 64 | 82 |
| XL | 110–115 | 66 | 84 |
| XXL | 116–121 | 68 | 86 |
Measurements are taken flat across the garment. Chest measurement is taken 2.5 cm below the armhole. Sleeve length is measured from the center back neck to the cuff endpoint. Back length is measured from the prominent cervical vertebra to the hem. Tolerance for all dimensions is ±1.5 cm. The coat is designed to accommodate a base layer and mid-layer insulation; users should select size based on overgarment fit rather than body measurements alone. Custom lengths (sleeve, torso, hem) are available upon request for specialized applications such as confined space entry or elevated work platforms.
Quality Assurance and Testing Protocols
Each batch undergoes hydrostatic head testing on three random specimens per 1,000 units, with a minimum pass threshold of 4,500 mm. Colorfastness to light is evaluated per ISO 105-B02, requiring a minimum rating of 4 after 40 hours of xenon arc exposure. Reflective tape performance is verified using retro-reflectivity measurements under CIE standard illuminant A, maintaining a minimum of 150 cd/lx/m² after 25 wash cycles. Dimensional stability is assessed after five home laundering cycles (40°C, tumble dry low), with maximum allowable shrinkage of 2% in length and 1.5% in width. All units receive a final visual inspection for seam integrity, coating uniformity, and trim attachment before packaging.
Care Instructions and Longevity Factors
Machine wash cold (30°C max) on gentle cycle with mild detergent; avoid bleach, fabric softeners, and wringing. Tumble dry low or hang dry away from direct heat sources. Do not iron or dry clean, as high temperatures can degrade the polyurethane coating. Reapply DWR (durable water repellent) treatment after 10–15 washes using a fluoropolymer-free spray-on product to maintain surface beading. Store loosely folded or on a wide hanger to prevent creasing in coated areas. With proper care, the coat maintains functional performance for 12–18 months of regular outdoor use; UV exposure is the primary factor affecting long-term material integrity, particularly in regions with high solar irradiance.