This women's rain jacket with integrated hood is engineered for industrial and commercial outdoor applications where reliable weather protection is required. The design focuses on material performance, seam integrity, and ergonomic fit to ensure consistent protection during prolonged exposure to precipitation.

Constructed from a 3-layer laminate system, the jacket utilizes a polyurethane-coated nylon outer shell bonded to a microporous polytetrafluoroethylene (ePTFE) membrane and a tricot knit backing. This configuration achieves a hydrostatic head rating of 20,000 mm while maintaining a moisture vapor transmission rate (MVTR) of 15,000 g/m²/24h, meeting EN 343 Class 3,1 standards for rain protection.

The outer shell consists of 40D nylon ripstop fabric with a tensile strength of 450 N warp and 380 N weft (ISO 13937-2), providing resistance to tearing and abrasion in demanding environments. A durable water repellent (DWR) finish is applied to the surface, reducing surface tension to cause water to bead and roll off rather than absorb into the fabric.

The intermediate ePTFE membrane contains 1.4 billion pores per square centimeter, each 20,000 times smaller than a water droplet but 700 times larger than a water vapor molecule. This structure enables liquid water blocking while allowing sweat vapor to escape, maintaining wearer comfort during physical exertion.

The inner lining is a 100% polyester tricot knit with a weight of 45 g/m², selected for its low friction against base layers and moisture-wicking properties. All seams are sealed with 20mm wide polyurethane tape applied via heat bonding, achieving a seam strength of 85% of the base fabric strength (ASTM D751).

The hood features a three-point adjustment system: vertical drawcord at the rear, horizontal cord locks at the temples, and a stiffened brim with 2mm polyethylene insert to maintain shape in wind. Peripheral vision is maintained through a 110-degree horizontal field of view, with the hood designed to rotate with head movement rather than restrict it.

Zipper protection includes a storm flap with hidden magnetic closures over the main Vislon zipper, reducing water ingress points. Zipper pulls are oversized for gloved operation, and all zipper teeth are coated with a lubricant to ensure smooth operation after 5,000 cycles (ASTM D2062). Cuffs incorporate adjustable hook-and-loop closures with neoprene gaskets to seal against water ingress.

Articulated elbows and gusseted underarms provide unrestricted range of motion, with shoulder seam placement shifted posteriorly to prevent chafing from backpack straps. The jacket length is 72cm (size M) with a dropped tail of 8cm to provide coverage when seated or bending. Reflective trim is applied using 3M Scotchlite reflective material, providing 300 cd/lux visibility at 30 meters under low-light conditions.

Available in sizes XS through 3XL, with graded measurements based on ASTM D5585 standard body dimensions for women. Chest circumference increases by 5cm per size increment, sleeve length by 2.5cm, and back length by 1.8cm. The fit is designed as a regular layering cut, accommodating a mid-layer fleece or insulated vest without compression.

Key fit measurements (size M): chest 102cm, waist 88cm, hip 106cm, sleeve length 60cm from center back neck, back length 72cm. All measurements are taken flat with the garment relaxed. Tolerance on all dimensions is ±1.5cm unless otherwise specified. Custom sizing is available upon request for volume orders exceeding 50 units.

This rain jacket is specified for use in utility work, telecommunications installation, municipal maintenance, and outdoor event staffing where workers require protection from rain while maintaining mobility and visibility. The breathability rating prevents heat stress during active tasks, unlike non-breathable PVC alternatives that can cause internal condensation and discomfort.

In forestry and land surveying applications, the abrasion-resistant outer shell withstands contact with branches and rocky terrain, while the adjustable hood accommodates hard hats or safety helmets. For maritime and dockside operations, the saltwater-resistant coatings and corrosion-resistant zipper (YKK AquaGuard) ensure longevity in humid, chlorinated environments.

Educational institutions and campus security teams utilize this jacket for outdoor patrols due to its professional appearance and compliance with high-visibility standards when combined with ANSI 107 compliant vests worn underneath. The packable design (stuffs into its own pocket) allows storage in vehicle compartments or tool belts for rapid deployment during sudden weather changes.

Each production lot undergoes hydrostatic head testing on three random samples per 1,000 units, with acceptance criteria requiring all samples to exceed 18,000 mm. Seam seal integrity is verified using a dye penetration test (AATCC Test Method 127) where no liquid leakage is permitted through sealed seams after 5 minutes of exposure.

Colorfastness to light is evaluated per ISO 105-B02, with a minimum rating of 4 (on blue wool scale) required after 20 hours of xenon arc exposure. DWR durability is assessed via ISO 9865, requiring a spray rating of 4 or higher after 20 wash cycles. All zippers are tested for smooth operation and water resistance per ASTM D2062 and DIN EN 14364.

Dimensional stability is assessed after 5 home laundering cycles (ISO 6330), with maximum allowable shrinkage of 3% in length and 2% in width. Functional testing includes a 30-minute rain chamber test (ISO 105-E04) where interior moisture accumulation must remain below 0.5g. Test reports are available upon request for qualifying commercial orders.

For procurement teams evaluating this rain jacket for operational use, key considerations include the balance between waterproofing and breathability, seam construction quality, and long-term durability of the DWR finish. The 3-layer laminate construction provides superior performance compared to coated fabrics or 2-layer systems in terms of both moisture management and lifespan.

Volume pricing and customization options (including color matching, logo placement, and specialized pocket configurations) are available for orders exceeding 25 units. Lead times typically range from 3-4 weeks for standard configurations, with expedited options available. To request a formal quotation, technical data package, or sample garment, please contact our industrial sales team.