Women's Long Waterproof Raincoat with Hood

This raincoat is engineered for extended outdoor exposure in wet conditions, combining a full-length silhouette with an integrated hood to provide comprehensive protection against rain, wind, and splashes. Designed for industrial and professional use, it prioritizes functional performance over aesthetic trends, utilizing materials and construction methods validated for durability in demanding environments.

Material Composition and Waterproofing Mechanism

The outer shell is constructed from a 3-layer laminated polyester fabric with a polyurethane (PU) membrane rated for 10,000mm hydrostatic head resistance, verified under ISO 811 testing standards. This membrane blocks liquid water penetration while allowing moisture vapor transmission at a rate of 5,000g/m²/24h (ASTM E96), reducing internal condensation during prolonged wear. The fabric undergoes a durable water repellent (DWR) finish on the exterior surface, which causes water to bead and roll off without saturating the outer layer, maintaining breathability over time.

Seams are sealed using ultrasonic welding or heat-activated tape application, eliminating needle holes that could compromise waterproof integrity. The hood features a three-point adjustment system—drawcords at the face opening and rear crown, plus a stiffened brim—to maintain shape and visibility in high-wind conditions without obstructing peripheral vision. All zippers are coated with PU film and equipped with storm flaps sealed via overlap and adhesive bonding, preventing water ingress at closure points.

Design Specifications for Functional Coverage

The coat extends to mid-calf length (approximately 110–120cm depending on size), providing coverage over the thighs and knees to protect against splashback from wet surfaces or vehicle spray. Sleeve length is designed with a 5cm extension beyond the wrist bone, featuring adjustable hook-and-loop cuffs to seal against rain entry during arm movement. The hood provides full head coverage, extending forward to shield the forehead and sides, with a minimum 15cm brim projection to deflect rain away from the face.

Internal construction includes a mesh lining in the upper back and underarms to promote air circulation, reducing heat buildup during active use. The lining is sewn with flat-felled seams to prevent chafing and is anchored only at key stress points (shoulders, side seams) to allow the outer shell to move independently, enhancing comfort during prolonged wear. No insulation is included, as the garment is intended as a shell layer for use with underlying thermal layers in variable climates.

Size Range and Fit Considerations

Available in standard women’s sizes from XS to 3XL, with chest measurements ranging from 84cm (XS) to 124cm (3XL) and corresponding hip measurements from 90cm to 130cm. The cut follows a relaxed but not oversized silhouette, allowing room for mid-layer garments such as fleece jackets or lightweight insulated vests without creating excess bulk that could snag on equipment or impede movement. Length is graded proportionally with size to maintain consistent coverage relative to the wearer’s height.

Each size includes a 2cm tolerance in key dimensions (chest, waist, hip) to accommodate minor variations in manufacturing. The hood opening is sized to fit over hard hats or helmets commonly used in industrial settings, with an internal circumference of 58cm when adjusted to minimum tightness. Sleeve length increases by 1.5cm per size increment to maintain proper wrist coverage across the size range.

Quality Control and Testing Protocols

Every batch undergoes hydrostatic head testing on three random samples per 1,000 units, with acceptance criteria requiring a minimum 9,500mm resistance after three wash cycles (ISO 6330) to validate DWR durability. Seam strength is tested via grab test (ASTM D5034) with a minimum requirement of 25N/mm in both warp and weft directions. Colorfastness to light (ISO 105-B02) and washing (ISO 105-C06) is maintained at grade 4 or higher after 20 cycles to prevent fading or staining under prolonged UV exposure.

Visual inspection includes 100% checking of seam integrity, zipper function, and fastener attachment at final assembly. Dimensional stability is verified post-wash using laser scanning to ensure shrinkage remains below 2% in length and 1.5% in width. All materials are certified OEKO-TEX® Standard 100, confirming absence of harmful substances above regulated thresholds, supporting safe use in environments where skin contact is prolonged.

Applications in Industrial and Professional Settings

This raincoat is commonly used by field technicians in utility maintenance, where prolonged exposure to rain during line inspections or repairs requires reliable, full-body protection without restricting movement. Agricultural workers operating in irrigation or livestock management benefit from the length and hood design when navigating wet terrain or handling animals in rainy conditions, reducing the risk of hypothermia during extended outdoor tasks.

Outdoor event staff, including security personnel and crowd managers, utilize the garment for its professional appearance and ability to maintain dryness during multi-hour shifts in variable weather. Transportation and logistics personnel involved in loading/unloading operations at outdoor depots value the splash protection and ease of donning/doffing over uniforms. The absence of insulation allows layering with thermal base layers in colder climates or wearing alone in mild, wet conditions, increasing seasonal utility.

Customization Options for Industrial Clients

Color options extend beyond standard navy, black, and gray to include high-visibility yellow or orange (EN ISO 20471 compliant) upon request, with reflective tape configurations customizable for sleeve, chest, and back placement to meet site-specific safety regulations. Logo application is available via screen printing or heat transfer on the left chest, upper back, or hood, with minimum order quantities starting at 50 units for custom branding.

Adjustable elements can be modified: hook-and-loop cuffs may be replaced with elastic or snap closures; hood drawcords can be supplemented with toggle locks for glove-friendly operation; and storm flaps can be reinforced with additional bar tacking at stress points. All customizations are subject to minimum order quantities and lead time adjustments, with technical drawings provided for approval prior to production.

For procurement teams seeking technical documentation, material safety data sheets (MSDS), or test reports detailing hydrostatic head, breathability, and seam strength values, these are available upon request. Samples can be provided for evaluation under actual use conditions, with lead times typically ranging from 10–15 business days for standard configurations and 20–25 days for customized orders.

To discuss specific requirements, request a quotation, or arrange sample evaluation, contact our technical sales team via the inquiry form linked below. All inquiries receive a response within one business day, including lead time confirmation and pricing based on volume and customization scope.