This women's long black waterproof coat is designed for industrial and professional outdoor environments requiring sustained protection from precipitation, wind, and abrasion. The garment extends to mid-calf length to maximize coverage while maintaining mobility for tasks involving frequent movement, equipment handling, or extended outdoor exposure. Construction prioritizes material integrity at stress points and seam sealing to prevent water ingress under prolonged use.

The coat integrates a three-layer laminate system: an outer shell of 100% nylon taslan with a durable water repellent (DWR) finish, a hydrophilic polyurethane membrane for breathability, and an inner tricot lining for comfort and moisture wicking. Seams are fully taped with 20mm wide waterproof tape applied under heat and pressure to ensure continuity of the barrier. The black color is achieved through solution dyeing, which provides superior UV stability and colorfastness compared to surface dyeing methods.

The outer shell uses 210D nylon taslan with a plain weave structure, offering a tear strength of approximately 25N (warp) and 22N (weft) as measured by ASTM D2261. This construction resists snagging on rough surfaces such as metal edges, concrete, or vegetation commonly encountered in utility, transportation, and field service operations. The DWR finish is fluoropolymer-based and rated for 80+ wash cycles before reapplication is recommended, maintaining a surface contact angle of >90°.

The hydrophilic polyurethane membrane provides a moisture vapor transmission rate (MVTR) of 8,000 g/m²/24h (ASTM E96) while maintaining a hydrostatic head resistance of 10,000mm (JIS L 1092 Method B). This balance allows sweat vapor to escape during moderate activity while preventing liquid penetration from heavy rain or snowmelt. The membrane is laminated directly to the underside of the outer shell to eliminate delamination risk under flexing or temperature cycling.

The inner lining consists of 100% polyester tricot with a weight of 80gsm, selected for its low friction against base layers and quick-drying properties. It does not absorb moisture, helping to maintain thermal efficiency in damp conditions. The lining is sewn separately from the shell and membrane to allow independent movement, reducing stress on the laminate during articulation at the shoulders and elbows.

The coat features a storm flap over the front zipper, extending 25mm beyond the zipper teeth on both sides and secured with magnetic closures at the top and bottom. This design prevents wind-driven water from penetrating the zipper coil, a common failure point in exterior garments. The zipper itself is a coated nylon reverse coil type with a water-resistant slider and pull tab designed for gloved operation.

Adjustable cuffs use a two-point system: an internal elastic gauntlet and an external hook-and-loop strap allowing circumference adjustment from 220mm to 280mm. This accommodates varying glove thicknesses while maintaining a seal against water ingress. The hood is detachable via concealed snap fasteners and features a laminated brim and rear drawcord with cord locks for vertical and horizontal adjustment, ensuring compatibility with hard hats or helmets when worn.

Two lower front pockets are positioned at the natural hand rest height, each with a vertical zipper opening and a storm flap extending 15mm beyond the zipper. The pockets are lined with mesh to promote drainage and prevent water accumulation. An internal chest pocket provides secure storage for electronics or documents, accessed via a horizontal zipper with a protective flap. Reflective trim is applied as 20mm wide strips on the sleeves and rear yoke, meeting EN ISO 20471 Class 2 requirements for visibility in low-light conditions.

The coat is offered in standard women’s sizes from XS to 3XL, with corresponding chest measurements ranging from 82cm (XS) to 124cm (3XL) and back lengths from 102cm (XS) to 110cm (3XL). The pattern incorporates a 10cm ease allowance in the chest and back to accommodate mid-layer insulation such as fleece or lightweight down jackets without restricting movement. Shoulder seams are set slightly posterior to the anatomical shoulder to improve fit when wearing backpacks or harnesses.

Sleeve length is measured from the center back neck to the cuff and ranges from 78cm (XS) to 84cm (3XL), designed to allow approximately 2cm of cuff extension past the wrist bone when the arm is at the side. This prevents ride-up during reaching or overhead work. The hem features a adjustable drawcord with cord locks inside the front pockets, allowing hem circumference to be reduced by up to 10cm to minimize wind lift and water splash in exposed conditions.

Fit testing indicates that the coat maintains a minimum of 5cm clearance between the shell and the wearer’s base layer across the back and shoulders when layered with a 200g fleece mid-layer, ensuring adequate air circulation for moisture management. Users requiring accommodation for bulky gear such as tool belts or radio harnesses should consider selecting one size up from their standard measurement.

Each coat undergoes a hydrostatic head test on a randomly selected sample from every production batch, with a minimum acceptance threshold of 9,500mm to account for potential variation in laminate bonding. Seam tape adhesion is verified using a peel test (ASTM D903) requiring a minimum force of 1.8N/mm to confirm durability after flexing and washing cycles. DWR performance is assessed via spray rating (AATCC 22) with a minimum acceptable score of 4 out of 5 after conditioning.

Dimensional stability is evaluated after five wash cycles at 40°C followed by tumble drying, with acceptable limits of ±3% in length and ±2% in width. Colorfastness to light is tested per ISO 105-B02, requiring a minimum rating of 4 (on a blue wool scale) after 20 hours of xenon arc exposure. All testing is conducted in accordance with ISO 9001-controlled procedures, with records retained for traceability.

Visual inspection occurs at 100% for critical areas including seam integrity, zipper function, and fastener attachment. AQL 2.5 is applied for major defects such as missed stitches, open seams, or material holes, while AQL 4.0 governs minor defects like slight shading variations or thread trims. Final packaging includes a polyethylene bag with desiccant to prevent moisture retention during storage and transit.

This coat is commonly specified for personnel in municipal infrastructure maintenance, where workers are exposed to prolonged precipitation during road inspections, sewer access, or streetlight repairs. The length provides protection against splash from passing vehicles and wet surfaces, while the breathable membrane prevents overheating during physical exertion in fluctuating temperatures.

In utility operations, such as power line inspection or meter reading, the coat’s compatibility with high-visibility requirements and tool-carrying needs makes it suitable for extended outdoor shifts. The detachable hood allows rapid adaptation when transitioning between vehicle cab and field work, and the secure pockets accommodate radios, test equipment, or documentation without risk of water damage.

Environmental monitoring and field research teams benefit from the coat’s quiet fabric construction—minimizing rustle that could disturb wildlife or interfere with audio recording equipment. The resistance to UV degradation ensures consistent performance over multiple seasons in open environments, and the solution-dyed black finish reduces glare in snowy or sandy conditions where reflected light can impair visibility.

While the standard configuration meets the needs of most professional users, certain adaptations are available upon request to align with specific operational or branding requirements. These include alternative closure systems such as covered metal zippers with storm flaps for enhanced durability in abrasive environments, or the addition of internal reinforcement patches at the elbows and shoulders for users engaged in frequent kneeling or contact with rough surfaces.

Pocket configurations can be modified—for example, converting the lower pockets to a bellows style with increased volume for tool storage, or adding an internal sleeve for tablet or radio retention. Reflective trim placement and width can be adjusted to meet specific regional safety standards beyond EN ISO 20471, such as ANSI/ISEA 107 in North America or CSA Z96 in Canada.

Color options are available through solution dyeing in alternative shades such as navy, charcoal, or olive, though black remains the standard for its low-visibility profile in certain security or surveillance applications. Custom labeling, including woven tags or heat-transfer logos, can be applied to the inside neck or left chest area. Minimum order quantities and lead times for customized variants depend on the complexity of the change and current production scheduling.

Procurement teams should consider the total cost of ownership when evaluating this garment, including expected service life under specified conditions, maintenance requirements, and potential need for replacement due to wear or degradation. The three-layer laminate construction, when cared for according to manufacturer guidelines, typically maintains waterproof and breathable performance for 24–36 months of regular use in moderate to harsh environments.

Reapplication of the DWR finish is recommended after approximately 80 wash cycles or when water no longer beads on the surface. This can be performed using a spray-on or wash-in fluoropolymer-based treatment compatible with polyurethane membranes. Proper storage—away from direct sunlight, heat sources, and sharp objects—helps prevent premature aging of the laminate and tape bonds.

For technical specifications, customization requests, or to discuss suitability for your operational environment, contact our product specialists.