Womens Full Length Waterproof Raincoat With Hood
Women's Full Length Waterproof Raincoat with Hood
This raincoat is engineered for continuous outdoor exposure in wet climates, combining full-length coverage with an integrated hood to protect against wind-driven rain and prolonged precipitation. The design prioritizes mobility and durability for field personnel, outdoor maintenance crews, and logistics workers who require reliable protection without compromising range of motion.
Constructed from a three-layer laminated fabric system, the outer shell uses a 100% polyester ripstop weave with a durable water repellent (DWR) finish rated to withstand 80+ hours of accelerated UV exposure per ASTM G154. The middle layer is a microporous polyurethane membrane providing a hydrostatic head resistance of 15,000 mm, while the inner layer features a brushed tricot lining for reduced skin friction and enhanced comfort during extended wear.
Seams are fully sealed using ultrasonic welding and 15mm wide polyurethane tape, achieving a leak-proof integrity tested to EN 343 Class 3 standards. The hood features a three-point adjustable system with elasticized drawcords at the crown and perimeter, reinforced with molded plastic toggles that maintain functionality after 500+ adjustment cycles. A storm flap covers the front zipper, which is a YKK AquaGuard® Vislon® coil type rated for 50,000 cycles without degradation.
Technical Specifications
| Parameter | Specification |
|---|---|
| Outer Shell Material | 100% polyester ripstop, 150 Dtex, DWR finish |
| Membrane | Microporous polyurethane, 15,000 mm hydrostatic head |
| Lining | Brushed polyester tricot, 80 g/m² |
| Seam Sealing | Ultrasonic welded + 15mm PU tape, EN 343 Class 3 |
| Hood Adjustment | Three-point elastic drawcord with molded toggles |
| Front Closure | YKK AquaGuard® Vislon® coil zipper, storm flap |
| Cuffs | Hook-and-loop adjustable, 40mm width |
| Length (Size M) | 115 cm from center back neck to hem |
| Weight (Size M) | 420 g |
| Packed Volume | 18 x 12 x 6 cm (stuff sack included) |
Material Performance & Testing
The fabric system achieves a moisture vapor transmission rate (MVTR) of 12,000 g/m²/24h per ASTM E96, balancing waterproofing with breathability to reduce internal condensation during moderate activity. Abrasion resistance exceeds 25,000 cycles on the Martindale tester (ASTM D4966), ensuring durability against backpack straps, tools, and rough surfaces. Colorfastness to washing and light is rated at 4+ on the grey scale after 20 laundering cycles per ISO 105-C06 and ISO 105-B02.
The DWR treatment maintains a contact angle of >110° after 20 wash cycles, preventing surface wetting that could compromise breathability. Thermal retention is enhanced by the brushed lining, which traps a stable layer of air next to the skin without adding bulk. All materials are Oeko-Tex Standard 100 certified, confirming absence of harmful substances relevant to prolonged skin contact.
Impact resistance at low temperatures (-20°C) is validated via drop-weight testing, showing no cracking or delamination in the membrane layer. The coat retains 95% of its original tear strength after 100 hours of xenon arc exposure, indicating suitability for year-round use in temperate to subarctic environments. These properties are critical for workers in utilities, transit, and emergency services who face unpredictable weather over extended shifts.
Design for Operational Use
The full-length cut extends below the knee to protect layered clothing and equipment worn underneath, such as utility belts, tool pouches, or tactical gear. Side vents with concealed zippers allow for heat regulation and improved stride mobility without compromising waterproof integrity. Reflective piping is integrated along the shoulders and hem, meeting EN ISO 20471 Class 2 visibility requirements when combined with compliant underlayers.
Interior storage includes two angled hand pockets with zippered closures and a vertical internal chest pocket for documents or electronics, all lined with mesh to promote airflow. The hood is stowable into a dedicated collar zip pocket when not in use, reducing profile for driving or confined space work. Articulated elbows and gusseted underarms prevent binding during reaching or lifting motions.
Sizing follows ISO 8559-1 anthropometric data, with a relaxed fit accommodating mid-layer insulation. Length grading is proportional across sizes (S-3XL), ensuring consistent coverage regardless of body type. The product is available in three standard colors: navy (Pantone 19-4035), charcoal (Pantone 18-4005), and high-visibility yellow (Pantone 13-0755), each with matching thread and tape for seamless appearance.
Applications in Industrial Environments
This raincoat is commonly specified by municipal works departments for road maintenance crews operating in prolonged rainfall, where standard ponchos fail to protect lower limbs and equipment. Utility technicians working on overhead lines or substations benefit from the full-length design, which prevents water runoff from saturating climbing gear or insulating gloves worn underneath.
Logistics and warehouse personnel exposed to loading docks in open-air facilities use the coat to stay dry during shift changes and outdoor inventory checks, with the hood providing unimpeded peripheral vision compared to bulky alternatives. In cold chain operations, the breathable membrane prevents sweat accumulation during transitions between refrigerated and ambient zones, reducing the risk of chill-related discomfort.
Emergency response teams, including flood rescue and disaster relief units, value the coat’s rapid deployment — the stowable hood and packable design allow it to be carried in a vehicle or backpack and donned in under 10 seconds. The durable construction withstands repeated use in debris-laden environments, outperforming disposable PVC alternatives in long-term cost of ownership.
Customization & Procurement Options
Standard configurations are available for immediate order, but the product supports engineering-level modifications based on specific operational needs. Common customizations include adjustable waist tabs with side-release buckles, reinforcement patches at high-wear zones (elbows, seat), and integration of radio loops or badge holders. Lining alternatives such as antimicrobial-treated mesh or thermal fleece can be specified for extended wear or cold climates.
Branding options include sublimation printing on the back yoke or sleeves, embroidery on the chest, or heat-transfer logos on the storm flap — all using inks and adhesives compatible with the membrane’s flexibility and wash resistance. Minimum order quantities for custom runs typically start at 50 units, with lead times of 4–6 weeks after artwork approval, depending on complexity and material availability.
Packaging is standardized as individual polybags with recycled content, packed in cartons of 10–20 units depending on size. Bulk orders can opt for palletized shipping with corner bracing and moisture-barrier liners for export compliance. All shipments include a technical datasheet, care instructions, and a certificate of conformance to EN 343 and Oeko-Tex standards.
For technical inquiries, specification sheets, or to discuss customization requirements for your operational environment, contact our application engineering team.
Request Technical Consultation