Waterproof Rain Jacket for Women with Hood

This technical overview details the design specifications, material performance, and functional characteristics of a women's waterproof rain jacket with integrated hood, intended for industrial and professional outdoor use where reliable moisture protection is required.

Material Composition and Waterproofing System

The jacket shell is constructed from a 3-layer laminate system: an outer face fabric of 100% nylon 6,6 with a denier rating of 70D, a middle layer of microporous polytetrafluoroethylene (ePTFE) membrane, and an inner protective layer of polyurethane-coated polyester tricot. The ePTFE membrane provides a hydrostatic head rating of 20,000 mm, measured per ISO 811 standard, indicating resistance to water penetration under sustained pressure. Seams are sealed using 18mm wide thermoplastic polyurethane (TPU) tape applied via hot-air welding, achieving a seam leakage rate of less than 0.1 mL/min under hydrostatic pressure testing.

Breathability is rated at 15,000 g/m²/24hr via ISO 11092 (sweating guarded hotplate test), allowing moisture vapor transmission to reduce internal condensation during moderate activity. The face fabric receives a durable water repellent (DWR) finish based on C6 fluoropolymer chemistry, which maintains 80% of its original repellency after 20 wash cycles per AATCC 135 test method.

Hood Design and Functional Features

The hood is integrated into the collar structure and constructed from the same 3-layer laminate as the shell. It features a three-point adjustment system: vertical drawcord at the rear crown, horizontal side pulls at the temples, and a front brim stiffener made of laminated polyethylene terephthalate (PET) film. The brim projects 65mm forward to shield the face from rain while maintaining peripheral vision. When not in use, the hood folds flat into the collar zone without creating bulk, secured by two hidden snap closures.

Cuffs are adjustable via 25mm wide hook-and-loop straps with thermoplastic polyurethane (TPU) coating for durability, allowing a closure range of 280mm to 360mm circumference. The hem uses a dual-cord shock lock system with cord stops, enabling adjustment from 880mm to 980mm waist circumference. Zipper is a coil-type YKK Vislon #8 with storm flap overlap of 22mm and water-resistant coating; the flap is secured by hidden magnets at 80mm intervals to prevent flutter.

Performance Characteristics and Testing

The jacket undergoes cyclic wet flex testing (ASTM D751) where the material is flexed 15,000 times while submerged; post-test hydrostatic head remains above 15,000 mm, indicating durable waterproofing under mechanical stress. Abrasion resistance is rated at 15,000 cycles (Martindale method, ASTM D4966) before visible face fabric degradation. Thermal retention is evaluated via ASTM F1291; when worn over a base layer and mid-layer, the system provides 1.8 clo insulation at 0 m/s wind speed, decreasing to 1.2 clo at 8 m/s due to air permeability of the laminate.

Reflective elements consist of 50mm wide silver-coated polyurethane tape applied to the upper back and sleeve cuffs, meeting EN ISO 20471 Class 2 requirements for daytime visibility. All hardware components (zippers, snaps, cord locks) are rated for 5,000 operational cycles without failure per internal cycle testing.

Sizing and Fit Specification

The jacket is available in standard women's sizes XS through 3XL, graded using ISO 8559-1 anthropometric data. Chest circumference ranges from 84cm (XS) to 124cm (3XL) at the underarm, with a tolerance of ±1.5cm. Back length measures 68cm (XS) to 78cm (3XL) from the base of the neck to the hem, designed to provide 10–15cm of hip coverage when worn with standard work trousers. Sleeve length is set at 58cm (XS) to 64cm (3XL) from shoulder seam to cuff, allowing 2cm of positive ease for layering.

Fit is classified as "semi-fitted" with 4–6cm of ease at the chest and 6–8cm at the hip, intended to accommodate a mid-layer fleece or softshell without restricting movement. Pattern grading follows a proportional scale where shoulder width increases by 0.4cm per size increment, and armhole depth by 0.3cm, maintaining ergonomic reach for overhead tasks.

Typical Applications in Industrial and Professional Settings

This jacket is specified for use in environments where personnel are exposed to prolonged precipitation and wind, such as utility line maintenance, agricultural inspection, outdoor equipment servicing, and emergency response operations. The combination of waterproofing, breathability, and adjustable sealing points reduces the risk of heat stress and saturation-induced fatigue during extended shifts. The hood’s design ensures visibility and protection when wearing hard hats or safety helmets, as the vertical adjustment accommodates headgear up to 25cm in external height.

In cold-wet climates, the garment functions as an outer shell in a three-layer system: moisture-wicking base layer, insulating mid-layer (fleece or synthetic), and this jacket as the protective barrier. The DWR finish prevents face fabric wetting, maintaining breathability and reducing conductive heat loss. For high-visibility requirements, the reflective tape placement enhances conspicuity in low-light conditions when combined with active lighting.

Manufacturing Considerations and Customization Options

Cutting is performed using computer-numerically controlled (CNR) lasers to ensure seam alignment and minimize material waste. Seam sealing tape application occurs in a climate-controlled environment (20±2°C, 50±5% RH) to ensure proper adhesion. Customization options include alternative face fabric colors (available in 12 standard shades), adjustable hood brim length (±10mm), and optional internal pockets made from recycled polyester mesh. Zipper type can be changed to a water-resistant coil or molded plastic variant upon request, with corresponding adjustments to storm flap design.

Logo application is possible via screen printing on the sleeve cuff or heat transfer on the upper back, limited to areas that do not compromise seam integrity or reflective performance. Minimum order quantity for customized runs is 50 units. Lead time for standard configurations is 25–30 working days; customized orders require an additional 7–10 days for approval and tooling.

For procurement teams evaluating this jacket for operational use, technical datasheets including full test reports, material safety data sheets (MSDS), and size charts are available upon request. Specification adjustments for specific environmental conditions or regulatory requirements can be discussed during the quotation phase.

To request a formal quotation, submit customization details, or obtain sample units for field testing, contact our technical sales team via the inquiry form on our website.