Olive Green Rain Jacket for Women

Engineered for outdoor industrial environments, this olive green rain jacket provides reliable water protection while maintaining mobility for field technicians, maintenance crews, and site supervisors. The design prioritizes functional performance over fashion, with material specifications and construction details aligned to the demands of prolonged exposure to wet conditions in utility, construction, and agricultural settings.

Material Composition and Waterproof Performance

The jacket utilizes a 3-layer laminated fabric system: an outer shell of 100% nylon taslan with a durable water repellent (DWR) finish, a hydrophilic polyurethane membrane rated at 10,000 mm hydrostatic head, and an inner tricot liner for moisture management. This construction achieves a balance between waterproof integrity and breathability, with a moisture vapor transmission rate (MVTR) of 8,000 g/m²/24h under standard test conditions (JIS L 1099 B1). Seams are fully taped with 20mm wide polyurethane tape to prevent leakage at stress points.

The olive green color is solution-dyed into the nylon fibers prior to weaving, ensuring UV stability and resistance to fading during prolonged outdoor exposure. This method avoids surface coatings that can degrade or peel, maintaining consistent appearance and spectral reflectance over time. The DWR treatment is fluorocarbon-free, complying with current environmental regulations for outdoor apparel in industrial markets.

Design Features for Industrial Use

The jacket features a storm flap with hidden snap closures over the primary zipper, reducing water ingress at the front closure. The zipper itself is a coated nylon coil type with a water-resistant slider and garage at the chin to prevent abrasion. Adjustable hook-and-loop cuffs allow sealing over gloves or wrist guards, while the hem employs a dual-adjustment system: internal drawcord with cord locks and external snap tabs for fine-tuning over belts or harnesses.

Two large welt pockets are positioned high on the chest to remain accessible when wearing a harness or backpack, each with drainage eyelets at the bottom to prevent water accumulation. Interior storage includes a single mesh pocket for small tools or documentation, positioned to avoid interference with back-mounted equipment. The hood is helmet-compatible, with a laminated brim and rear volume adjustment via elastic cord and toggle, ensuring visibility and fit when worn over hard hats or helmets.

Sizing and Fit Considerations

Available in sizes XS through 3XL, the jacket follows a relaxed fit pattern designed to accommodate mid-layer insulation without restricting movement. Chest measurements range from 86 cm (XS) to 132 cm (3XL), with corresponding sleeve lengths from 76 cm to 88 cm. The back length is graded proportionally, measuring 68 cm in XS and increasing by 1.5 cm per size increment to 80 cm in 3XL. These dimensions are based on ASTM D5587 standard body measurements for women’s outerwear, adjusted for industrial layering scenarios.

The cut allows for full range of motion in overhead reaching and lateral bending, critical for tasks such as valve operation, panel access, or equipment inspection. Articulated elbows and gusseted underarms prevent binding during repetitive motion. Users requiring a slimmer profile for layering under harnesses may consider sizing down, while those wearing thick fleece or insulated liners should size up to maintain comfort and mobility.

Quality Control and Testing

Each batch undergoes hydrostatic head testing on finished fabric samples according to AATCC 127, with acceptance criteria set at ≥10,000 mm before taping and ≥8,000 mm after tape application to account for potential seam vulnerability. Colorfastness is evaluated per AATCC 61 (laundering) and AATCC 16.3 (light exposure), with minimum ratings of 4.0 for color change and staining. DWR performance is assessed via spray test (AATCC 22), requiring a minimum score of 80 after 5 wash cycles.

Dimensional stability is verified after 5 home laundering cycles (AATCC 135), with shrinkage limited to ≤3% in length and ≤2% in width. All components—zippers, snaps, cords, and tapes—are inspected for functional integrity and resistance to corrosion from sweat and environmental exposure. Final audit includes visual inspection for stitch density (minimum 8 stitches/cm), thread tension, and absence of defects in high-stress areas such as shoulder seams and pocket attachments.

Packaging and Shipping

Jackets are folded using a standardized method to minimize creasing and packed in individual polybags made from 50µm LDPE with anti-static additive. Each bag includes a silica gel desiccant packet (5g) to control moisture during transit. Cartons are constructed from single-wall corrugated cardboard (120 gsm) with dimensions optimized for palletization: 40 cm × 30 cm × 25 cm, holding 10 units per carton. Pallet configuration is 12 cartons per layer, 4 layers high (480 units), stretch-wrapped with LLDPE film for load stability.

Export shipments comply with ISTA 3A standards for packaged-goods transportation. Markings include size, color, care instructions, and country of origin in accordance with ISO 9001:2015 labeling requirements. Custom packaging options, such as bulk packing without individual bags or inclusion of branded tags, are available upon request and may affect unit pricing and lead time.

Typical Applications in Industrial Sectors

This jacket is commonly specified for personnel engaged in outdoor utility work, including meter reading, line inspection, and substation maintenance, where protection from rain and wind is required without compromising visibility or mobility. In construction, it serves as a protective outer layer for site supervisors, surveyors, and equipment operators working in exposed conditions. Agricultural applications include crop inspection, irrigation maintenance, and livestock management in wet climates.

The olive green color provides low visual contrast in natural environments, making it suitable for wildlife monitoring, trail maintenance, and park management where minimizing visual disturbance is beneficial. It is not intended as a high-visibility garment; where ANSI/ISEA 107 compliance is required, this model should be worn under an approved safety vest or paired with high-visibility accessories. The design does not include reflective trim, as it is engineered for general weather protection rather than conspicuity in low-light work zones.

For technical datasheets, size charts, or to request a sample evaluation for your team, contact our industrial apparel specialists. We provide detailed material safety data (MSDS) for all components and can support customization requests for corporate branding, pocket configuration, or adjusted lengths based on specific operational needs.