Factory Direct Women's Longline Rain Jacket

Designed for industrial environments requiring reliable weather protection, this women's longline rain jacket provides extended coverage without compromising mobility. Constructed with a 3-layer laminated shell fabric, it delivers a hydrostatic head rating of 10,000 mm and breathability of 8,000 g/m²/24hr, balancing waterproof performance with vapor transmission for sustained wear in variable conditions. The extended length reaches mid-thigh, offering enhanced protection for the lower torso and upper legs during prolonged outdoor exposure.

Material Composition and Performance Characteristics

The outer layer consists of 100% nylon ripstop with a durable water repellent (DWR) finish, providing abrasion resistance and surface water shedding. The middle layer is a polyurethane (PU) membrane engineered for consistent waterproofing under dynamic stress, while the inner layer features a brushed polyester tricot for skin comfort and moisture wicking. Seams are fully taped with 20mm wide heat-bonded tape to prevent leakage at stitch points, meeting EN 343 Class 3,1 standards for rain protection.

Fabric weight is 180 g/m², offering a balance between durability and flexibility. The jacket maintains dimensional stability after 50 wash cycles at 40°C, with no delamination or coating degradation observed in accelerated aging tests. Zipper teeth are coated nylon with a storm flap backed by hydrophilic tape to minimize water ingress through the front closure.

Design Features for Industrial Use

Adjustable cuffs use hook-and-loop closures with nylon webbing tabs, allowing secure fit over gloves or sleeves without snagging. The hood is three-panel, insulated with 80g synthetic fill, and features a laminated brim and rear drawcord adjustment for perimeter sealing. A two-way front zipper enables ventilation control and compatibility with harnesses or belts worn underneath.

Two angled hand pockets are positioned above the hip belt line to remain accessible when wearing waist-mounted tools or equipment. Each pocket has a water-resistant zipper and internal storm flap. Interior includes a single mesh drop pocket for small items and a detachable ID holder loop on the left chest. All hardware is YKK or equivalent, selected for corrosion resistance in humid or marine environments.

Sizing and Fit Specification

Available in standard industrial sizes from XS to 3XL, with grading based on ISO 8559-1 anthropometric data for the female workforce. The longline cut adds 10cm to the back length compared to standard rain jackets, measured from the cervical point to the hem. Sleeve length follows ISO 8559-1 Type B methodology, with a 2cm taper from bicep to cuff to reduce bulk when layered.

Chest, waist, and hip measurements follow proportional grading rules to maintain ease of movement across sizes. A size M has a half-chest measurement of 52cm, back length of 78cm, and sleeve length of 60cm. Custom length adjustments are available upon request for specialized applications such as elevated work platforms or extended kneeling postures.

Quality Control and Manufacturing Consistency

Each jacket undergoes inline inspection at four critical points: fabric roll acceptance, seam taping integrity, zipper function, and final dimensional check. Hydrostatic head testing is performed on a batch basis using a Suter Hydrostatic Tester according to ISO 811, with acceptance criteria of ≥9,000 mm after three minutes. Breathability is verified via JIS L 1099 B1 method on the same lot.

Colorfastness to light, washing, and rubbing is tested per ISO 105-B02, ISO 105-C06, and ISO 105-X12, with minimum rating of 4/5 on the grey scale. All materials are OEKO-TEX® Standard 100 certified to confirm absence of harmful substances. Batch traceability is maintained via QR code labels linking to raw material certificates and test reports.

Applications in Industrial Sectors

This jacket is suited for environments where personnel require continuous weather protection while performing tasks at height, in transit, or during prolonged outdoor operations. Common use cases include utility line maintenance, railway inspection, port logistics, and agricultural fieldwork where exposure to rain and wind is frequent but full rain suits are impractical due to mobility needs.

The extended length provides added protection when bending or reaching, reducing the need for separate rain pants in intermittent precipitation. For high-visibility requirements, a reflective tape option is available on request, applied per EN ISO 20471 standards without compromising the jacket’s waterproof integrity.

For technical inquiries, customization requests, or sample evaluation, contact our engineering team to discuss material alternatives, branding options, or bulk procurement terms. All factory-direct orders include full traceability documentation and support for integration into existing PPE programs.