This long black rain jacket for women is designed for industrial and outdoor work environments where protection from prolonged wet conditions is required. It combines waterproof performance with freedom of movement, using materials and construction methods suited to demanding field applications. The jacket is manufactured directly by the producer, eliminating intermediary markups while maintaining consistent quality control.

The garment extends to mid-calf length, providing enhanced coverage compared to standard waist-length rainwear. This design reduces exposure of lower layers and equipment to precipitation, particularly beneficial in tasks involving prolonged standing, bending, or work in wet terrain. The cut is tailored to accommodate layering underneath without restricting mobility.

All seams are fully taped using heat-activated waterproof tape to prevent leakage at stitch points. Zippers are covered with storm flaps sealed via adhesive or ultrasonic bonding to maintain integrity under driving rain. Adjustable cuffs and hem allow users to seal gaps against wind-driven moisture.

The outer shell is constructed from a 3-layer laminate system: a durable polyester face fabric, a microporous polyurethane (PU) membrane, and a protective inner tricot layer. The face fabric has a denier rating of 150D, offering resistance to abrasion from brush, tools, and rough surfaces.

The PU membrane provides a hydrostatic head rating of 10,000 mm, meaning it can withstand the pressure of a 10-meter column of water before leakage occurs. This exceeds the minimum 1,500 mm threshold for waterproof classification and ensures performance in heavy rain and sleet.

Breathability is rated at 8,000 g/m²/24hr via the Moisture Vapor Transmission Rate (MVTR) test, allowing internal moisture from perspiration to escape while maintaining external waterproofing. This balance reduces internal condensation buildup during moderate activity.

The inner tricot layer protects the membrane from oils, dirt, and abrasion caused by inner layers or equipment. It also improves wearing comfort by reducing direct contact with the laminated structure.

The jacket includes a detachable insulated liner that zips into the main shell, allowing adaptation to varying temperatures. The liner is made of 100% polyester fleece with a weight of 200 g/m², providing thermal insulation without excessive bulk.

Reflective trim is applied to the shoulders, sleeves, and back in compliance with EN ISO 20471 Class 2 standards for visibility in low-light conditions. The reflective material uses microprismatic technology to return light toward its source, enhancing conspicuity near vehicles or machinery.

Multiple storage pockets are included: two hand-warmer pockets with water-resistant zippers, one internal security pocket with hook-and-loop closure, and a radio loop on the left shoulder. Pocket bags are made of the same 3-layer laminate to maintain waterproof integrity.

The hood is adjustable via dual pull-cords and features a laminated brim to deflect rain from the face. It stows into the collar when not in use, reducing snag hazards.

The jacket is available in standard women’s sizes from XS to 3XL, based on ISO 8559-1 body measurement charts. Sleeve length is graded proportionally with torso size to maintain correct wrist coverage across the range.

The cut allows for a base layer, mid-layer fleece, and lightweight insulated jacket underneath without compression. Users requiring additional insulation for sub-zero environments should consider sizing up to accommodate thicker layers.

Each size is produced using graded patterns validated through wear trials with field personnel in construction, utilities, and logistics sectors. Feedback from these trials informed adjustments to shoulder width, back length, and pocket placement.

Every batch undergoes hydrostatic head testing on a representative sample of finished garments using a Suter tester. Results are recorded and compared against the 10,000 mm target; any deviation triggers material lot review.

Seam strength is tested via the grab test method (ASTM D5034) to ensure taped seams retain at least 80% of the base fabric’s tensile strength after thermal bonding. Peel adhesion of the tape is measured to confirm long-term durability under flexing.

Colorfastness to light, washing, and rubbing is evaluated according to ISO 105-B02, ISO 105-C06, and ISO 105-X12 standards. The black dye used is selected for UV stability to prevent fading during prolonged outdoor exposure.

Final inspection includes verification of tape coverage, zipper function, reflective trim placement, and label accuracy. AQL 2.5 standards are applied for major and minor defects.

This jacket is commonly specified in utility maintenance, where workers perform inspections and repairs on outdoor electrical, water, and telecommunications infrastructure during inclement weather. The length protects tool belts and safety harnesses from saturation.

In logistics and freight handling, it is used by personnel loading and unloading cargo in open yards or docks. The reflective trim enhances visibility during early morning or night shifts, while the waterproof layer prevents damage to scanned electronics or paperwork carried inside.

Construction site supervisors and surveyors benefit from the extended coverage when working in excavated areas or uneven terrain, where splash and ground moisture are prevalent. The adjustable cuffs prevent water ingress when wearing gloves.

Environmental field technicians conducting water sampling, soil analysis, or wildlife monitoring in wetlands or riparian zones rely on the breathability to manage perspiration during active movement while staying dry from external moisture.

Logo application is available via heat transfer or embroidery on the left chest, sleeve, or back. Reflective trim color can be altered to silver, yellow, or orange to match corporate branding while maintaining visibility compliance.

Pocket configuration can be modified—for example, adding a dedicated tablet pocket with clear vinyl window or enlarging hand pockets for glove storage. These changes are evaluated for impact on waterproof integrity before implementation.

Liner weight can be adjusted between 150 g/m² and 300 g/m² fleece, or replaced with a lightweight down alternative for colder climates. Zipper type can be upgraded to corrosion-resistant coil or metal teeth for marine or chemical-exposed environments.

All customizations are subject to minimum order quantities and may affect lead time. Technical drawings and material samples are provided upon request for approval prior to production.

To request a quotation, submit customization details, or arrange for a sample evaluation, contact our technical sales team. Provide your intended use case, required sizes, and any branding or specification needs. We will respond with a detailed quote, lead time, and material data sheets.

Request Information or Sample