Factory Direct Ladies Waterproof Coats Sale
Factory Direct Ladies Waterproof Coats Sale
These waterproof coats are engineered for women in industrial and field environments requiring reliable protection against precipitation, wind, and temperature fluctuations. Designed for durability and functional performance, they are sourced directly from manufacturing facilities to eliminate intermediary markups while maintaining strict material and construction standards. The sale offering provides access to current inventory and overstock items at reduced unit costs, suitable for bulk procurement by safety officers, facility managers, and uniform suppliers.
Material Composition and Weather Resistance
The outer shell utilizes a 100% polyester plain weave with a polyurethane (PU) coating applied at 1.8 mil thickness, providing a hydrostatic head rating of 5,000 mm—sufficient for moderate to heavy rain exposure without leakage. Seams are sealed using thermoplastic polyurethane tape with a width of 20 mm, applied via heat bonding at 140°C to prevent water ingress at stitch points. The coating maintains flexibility down to -20°C, avoiding brittleness in cold storage or outdoor winter operations.
An internal liner consists of 100% polyester fleece weighing 180 g/m², offering thermal retention equivalent to 4.2 clo units when worn as a single layer. This layer wicks moisture at a rate of 0.8 mm/s, reducing condensation buildup during prolonged use. The combination of shell and liner achieves a total thermal resistance (RCT) of 0.28 m²·K/W under ISO 11092 testing conditions, balancing warmth with breathability for active work environments.
Design Features for Functional Use
The coat features a two-way front zipper with storm flap, secured by hidden snap fasteners to prevent wind penetration. The flap extends 25 mm beyond the zipper teeth on both sides, creating a baffle that reduces air infiltration by approximately 35% compared to exposed zippers. Adjustable hook-and-loop cuffs allow for a seal range of 180 mm to 260 mm circumference, accommodating gloves or layered sleeves while maintaining wrist protection.
A detachable hood is constructed with the same PU-coated shell and includes a laminated brim measuring 65 mm in width to shield the face from rain. The hood attaches via four reinforced bar-tacked points and adjusts using a dual-cord system with toggle locks, allowing vertical and horizontal positioning. Reflective trim, compliant with EN ISO 20471 Class 2 standards, is integrated into the sleeves and back panel, providing 360° visibility at low light levels when illuminated by vehicle headlights.
Sizing and Fit Specifications
Available in sizes XS through 3XL, the coat follows a relaxed fit pattern with 120 mm of ease at the chest and 100 mm at the hips to allow freedom of movement and layering underneath. Back length varies from 78 cm (XS) to 86 cm (3XL), measured from the base of the collar to the hem, ensuring adequate coverage during bending or reaching motions. Sleeve length increases proportionally with size, ranging from 58 cm to 64 cm, designed to terminate at the wrist bone when arms are at rest.
Grading between sizes adheres to ISO 8559-1 standards, with consistent increments of 25 mm in chest circumference and 20 mm in back length. The pattern includes a 15 mm drop shoulder to reduce restriction during arm elevation, beneficial for tasks requiring overhead reach. All sizes undergo flat measurement verification prior to packaging, with tolerance limits of ±3 mm on linear dimensions and ±5 mm on circumferential measurements.
Quality Control and Testing Protocols
Each coat undergoes a 100% visual inspection for coating uniformity, seam integrity, and component alignment before packaging. Random samples from each batch are subjected to hydrostatic pressure testing (ISO 811) and spray rating assessment (ISO 4920) to verify ongoing compliance with the 5,000 mm water resistance standard. Colorfastness to light and washing is evaluated per ISO 105-B02 and ISO 105-C06, with acceptable ratings of 4 or higher on the grey scale after 20 cycles.
Dimensional stability is tested after three wash cycles at 40°C per ISO 6330, with maximum allowable shrinkage of 3% in length and 2% in width. Zipper durability is validated via 5,000 cycles of opening and closing under ISO 105-D02, ensuring functional longevity in high-use scenarios. All test records are retained for 24 months and available for review upon qualified request.
Applications in Industrial and Field Operations
These coats are commonly deployed in logistics hubs, outdoor maintenance crews, and agricultural processing facilities where workers experience intermittent exposure to rain and wind. The combination of waterproofing, thermal retention, and visibility features supports compliance with site-specific PPE requirements in environments such as loading docks, utility corridors, and perimeter inspection routes. Unlike fashion-oriented rainwear, the construction prioritizes abrasion resistance and seam strength over aesthetics, reducing replacement frequency in demanding conditions.
In cold chain operations, the coat serves as a mid-layer option when paired with insulated coveralls or worn independently during transitions between refrigerated zones and ambient areas. Its breathability prevents overheating during physical exertion, while the sealed seams prevent moisture migration that could compromise inner layers. Facilities managing outdoor equipment or conducting seasonal infrastructure checks benefit from the coat’s packability—each unit compresses to approximately 1,200 cm³ when folded, facilitating storage in vehicle cabins or wall-mounted lockers.
Comparison Table: Standard vs. Sale Inventory
| Attribute | Standard Production | Sale Inventory (Current Offer) |
|---|---|---|
| Unit Price | $42.50 | $29.75 |
| Minimum Order Quantity | 100 units | 25 units |
| Lead Time | 4–6 weeks | Ships in 5 business days |
| Available Sizes | XS–3XL (full range) | Limited sizes (S, M, L, XL) |
| Color Options | Navy, Black, Olive | Navy only (current lot) |
| Packaging | Individual polybag | Individual polybag |
The sale inventory consists of overstock from a recent production run, featuring identical material specifications and construction quality to standard orders. Size and color availability are limited to current stock levels, with no variations in performance characteristics. All units are inspected and packaged to the same quality thresholds as regular production, ensuring consistency in protection and durability.
Ordering and Logistics Information
Orders are processed directly from the manufacturing facility, with documentation including commercial invoice, packing list, and material safety data sheet (MSDS) for the polyurethane coating. Shipping is arranged via FOB factory terms, with freight costs calculated based on destination and volume. Packaging uses 50-unit cartons measuring 40×30×25 cm, each weighing approximately 12.5 kg when filled, optimized for palletization and container loading.
Payment terms require 30% advance via T/T, with the balance due before shipment. Export documentation includes certificate of origin and ISO 9001 compliance declaration upon request. For inquiries regarding sizing validation, bulk pricing tiers, or custom labeling options, contact the sales department using the provided channel. All communication is handled in English with technical support available for specification clarification.