Factory Direct Black Rain Coat Womens
Factory Direct Black Rain Coat Women's
This women's black rain coat is engineered for industrial environments requiring reliable weather protection without compromising mobility. Constructed from a 3-layer laminated fabric system, it combines a waterproof polyurethane membrane with a durable nylon outer shell and a breathable polyester mesh lining. The design prioritizes functional performance over fashion, meeting the demands of outdoor work in manufacturing, logistics, and field operations.
Material Composition and Performance Characteristics
The outer shell uses 200D nylon ripstop with a DWR (durable water repellent) finish, providing resistance to abrasion and light chemical splashes commonly encountered in industrial settings. The intermediate layer is a 100% polyurethane film with a hydrostatic head rating of 10,000 mm, ensuring protection against prolonged rain exposure. The inner lining consists of 150gsm polyester mesh, designed to facilitate moisture vapor transfer and reduce internal condensation during physical activity.
Seams are fully taped with 20mm wide polyurethane tape using heat-bonding technology, eliminating needle holes that could compromise waterproof integrity. Zippers are coated with polyurethane and feature storm flaps with hook-and-loop closures to prevent water ingress at closure points. The hood is adjustable via a single-hand drawcord system and integrates a laminated brim to shield the face without obstructing peripheral vision.
Design Specifications for Industrial Use
The coat follows a ergonomic cut with articulated elbows and a gusseted underarm design to maintain range of motion during tasks such as equipment handling or climbing. Length is calibrated to mid-thigh (approximately 85cm for size M) to balance coverage with mobility, avoiding interference with safety boots or knee pads. Cuffs are adjustable via hook-and-loop tabs, allowing secure fit over gloves or sleeves without creating pressure points.
Reflective trim is applied in accordance with EN ISO 20471 Class 2 standards, featuring 50mm wide silver reflective tape positioned on the shoulders, sleeves, and back for 360-degree visibility in low-light conditions. The reflective material maintains performance after 25 industrial wash cycles at 60°C. Pockets are positioned to avoid interference with harnesses or tool belts, featuring drainage grommets and storm flaps to prevent water accumulation.
Size Range and Fit Considerations
Available in sizes XS through 3XL, with grading based on ISO 8559-1 anthropometric data for female industrial workers. Each size increment adjusts chest, waist, and hip measurements by 4cm, while sleeve length increases by 2cm and back length by 1.5cm per size. The coat is designed to accommodate mid-layer insulation (e.g., fleece or softshell) without restricting movement, with a recommended ease of 8-10cm at the chest and 6cm at the waist for industrial layering systems.
Custom sizing options are available for bulk orders, including adjustments to torso length, sleeve length, or shoulder width based on provided measurement charts. For specialized applications such as confined space work or elevated temperature environments, modifications to ventilation zones or material thickness can be discussed during quotation. All customizations maintain the core waterproof and breathability specifications unless otherwise specified.
Quality Control and Testing Protocols
Each batch undergoes hydrostatic head testing on the finished garment according to ISO 811, with a minimum acceptance threshold of 9,000 mm after 5 wash cycles. Breathability is verified using the ISO 11092 sweating guarded hotplate test, targeting a Ret value below 15 m²·Pa/W for comfortable wear during moderate activity. Seam strength is tested per ISO 13935-2, requiring a minimum of 20N elongation before failure at taped joints.
Colorfastness to light, washing, and rubbing is evaluated per ISO 105-B02, ISO 105-C06, and ISO 105-X12, with a minimum rating of 4 on the gray scale for all finishes. Dimensional stability is assessed after 5 wash cycles at 60°C, with shrinkage limited to 3% in length and 2% in width. Final inspection includes 100% visual checks for stitching defects, tape adhesion, and functional operation of closures and adjusters.
Applications in Industrial Sectors
This rain coat is suited for outdoor personnel in logistics hubs where exposure to rain during loading/unloading operations is frequent, such as rail yards or port terminals. The combination of waterproofing and visibility features supports compliance with site safety protocols in environments with moving vehicles and low-light conditions. In manufacturing, it protects workers conducting external equipment inspections, maintenance on rooftop HVAC units, or routine checks on storage tanks and silos.
Field service teams in utilities (water, power, telecommunications) benefit from the coat’s durability when working in remote or adverse weather conditions, particularly when accessing underground vaults, pole-mounted equipment, or substation perimeters. The pocket configuration allows secure carrying of small tools or documentation while maintaining protection from precipitation. For logistics and warehousing, the coat accommodates use with high-visibility vests or harnesses without compromising fit or safety equipment integration.
Packaging and Ordering Information
Each coat is individually folded and packed in a polyethylene bag with a desiccant packet to prevent moisture retention during storage. Cartons contain 10 units, labeled with size, color, and batch traceability information. Standard packaging is optimized for palletization, with dimensions of 400mm x 300mm x 200mm per carton and a gross weight of approximately 8kg. Export packaging includes reinforced corner guards and moisture-barrier liners for containerized shipments.
Minimum order quantity is 50 units for factory-direct pricing, with volume discounts available at 200+ units. Lead time for standard sizes is 15-20 working days after artwork approval and deposit. Custom sizes or modifications require additional lead time, typically 25-30 days, depending on complexity. Samples are available upon request, with costs credited toward the first order. All pricing is FOB factory, excluding taxes and freight.
Comparison with Conventional Rainwear
| Feature | Standard PVC Raincoat | This Industrial Rain Coat |
|---|---|---|
| Waterproof Rating | 5,000 mm hydrostatic head | 10,000 mm hydrostatic head |
| Breathability (Ret) | >30 m²·Pa/W (non-breathable) | <15 m²·Pa/W |
| Abrasion Resistance | Low (prone to cracking) | High (200D nylon ripstop) |
| Reflective Compliance | Often absent or low-grade | EN ISO 20471 Class 2 |
| Typical Use Case | Light-duty, occasional use | Daily industrial outdoor work |
Unlike conventional PVC or coated polyester rainwear, this garment maintains flexibility in temperatures down to -20°C and resists stiffening or cracking after prolonged UV exposure. The laminated construction prevents delamination, a common failure point in lower-cost alternatives where adhesive bonds degrade over time. The integrated reflective system eliminates the need for separate vests, reducing layering complexity and potential snag hazards in confined spaces or near machinery.
For technical specifications, customization requests, or to discuss application-specific requirements, contact our engineering team via the inquiry form. Provide details on intended use, environmental conditions, and any required certifications to receive a tailored recommendation and accurate quotation.