This raincoat is designed for industrial and commercial outdoor use where prolonged exposure to wet conditions is expected. It provides full-length coverage to protect the wearer’s clothing and skin from rain, wind, and light splashes commonly encountered in facility maintenance, logistics, and field operations.

The garment is constructed from a 100% polyester outer shell with a polyurethane (PU) coating on the interior surface. This coating provides a hydrostatic head rating of approximately 5,000 mm, meaning it can withstand the pressure of a 5-meter column of water before leakage occurs. Seams are sealed with heat-activated tape to prevent water ingress at stitch points.

The coat features a detachable hood with adjustable drawcords and a two-way front zipper covered by a storm flap with snap closures. Adjustable cuffs and a drawcord hem allow users to seal openings against wind-driven rain. Ventilation is provided via underarm eyelets to reduce internal condensation during moderate activity.

The outer fabric is a 210T polyester taffeta with a thread count of 210 threads per inch in both warp and weft directions. This tight weave enhances tear resistance and dimensional stability. The PU coating adds flexibility and abrasion resistance while maintaining a lightweight profile—approximately 180 g/m² for the coated fabric.

All seams are double-stitched with polyester thread and then sealed with 15mm-wide polyurethane tape applied via heat bonding. This method ensures seam integrity matches the fabric’s water resistance. The hood is lined with the same coated polyester for consistency and includes a rigid peak to shield the face.

Hardware components include nylon coil zippers rated for 5,000 cycles, brass snap fasteners for the storm flap, and polyester drawcords with plastic toggles. These materials are selected for corrosion resistance and long-term performance in humid environments.

This raincoat is commonly used by personnel in outdoor utility work, such as meter reading, park maintenance, and street cleaning, where workers remain exposed for extended shifts. The full-length design prevents water from running down the legs and into footwear, reducing the risk of discomfort and slips.

In logistics and warehousing, it is worn during loading/unloading operations in open yards or during transit between facilities. The coat’s lightweight nature allows it to be worn over high-visibility vests or insulated layers without excessive bulk.

Field service teams in telecommunications and energy sectors use it during equipment inspections or repairs in adverse weather. The adjustable features allow quick adaptation to changing conditions, and the dark color minimizes visible soiling during prolonged use.

The raincoat is available in standard women’s sizes ranging from XS to 3XL. Chest measurements are taken 2.5 cm below the armhole, with corresponding garment widths as follows: XS (46 cm), S (49 cm), M (52 cm), L (55 cm), XL (58 cm), 2XL (61 cm), 3XL (64 cm). Back length from the base of the neck to the hem is approximately 115 cm for size M, with a 2 cm increment per size increase.

Sleeve length is measured from the center back neck to the cuff end. For size M, this is 78 cm, increasing by 1.5 cm per size. The hood opening circumference is 56 cm for all sizes, adjustable via drawcord to reduce to approximately 42 cm. These dimensions allow for layering over sweaters or light fleece without restriction.

The cut is slightly tapered at the waist to reduce wind flap while maintaining freedom of movement. Users should consult the size chart when ordering, as industrial sizing may differ from retail standards. Custom length adjustments are available upon request for bulk orders.

Each batch undergoes hydrostatic head testing on a representative sample according to ISO 811 standards. Five specimens are tested per lot, and the average must exceed 4,500 mm to pass. Seam strength is evaluated using the grab test method (ASTM D5034), requiring a minimum of 60 N in both warp and weft directions.

Visual inspection checks for coating uniformity, seam tape adhesion, and hardware function. Any bubbles, delamination, or misaligned zippers result in rejection. Colorfastness to light and washing is assessed using ISO 105-B02 and ISO 105-C06, with a minimum rating of 4 on the gray scale required.

Finished garments are subjected to a spray test (AATCC 22) to verify surface water resistance. After 24 hours of storage at 20°C and 65% RH, no wetting should occur on the outer surface. These tests ensure consistent performance across production runs.

Each raincoat is folded to a standardized size and placed in a low-density polyethylene (LDPE) bag measuring 40 x 50 cm. The bag is sealed and labeled with size, color, and batch information. Twenty units are packed into a single corrugated cardboard carton with dimensions of 40 x 30 x 50 cm.

Cartons are sealed with pressure-sensitive tape and strapped for palletization. A typical pallet holds 20 cartons (400 units) and is stretch-wrapped for stability. Gross weight per carton is approximately 8.5 kg, depending on size mix. These methods protect against moisture and damage during transit.

For export shipments, cartons are marked with handling symbols and country of origin. Lead time from order confirmation to shipment is typically 15–25 days for standard sizes, depending on fabric availability and order volume. Custom specifications may extend this timeline.

This raincoat offers a balanced solution between cost, durability, and comfort. Unlike PVC alternatives, it maintains flexibility in cold conditions and avoids the stiff, noisy feel associated with plastic coatings. Compared to high-end laminated shells, it sacrifices some breathability and extreme weather resistance but provides significantly better value for routine industrial use where full waterproofing and ease of maintenance are priorities.

For technical inquiries, custom sizing requests, or bulk order pricing, contact our industrial sales team. Provide your intended use case, required quantities, and any specification variations to receive a detailed quotation and lead time estimate.