Colorful Cream Rain Jacket Women's

This women's rain jacket features a cream-colored base with integrated color accents designed for visibility and aesthetic appeal in variable weather conditions. Constructed from a three-layer laminate system, the jacket provides waterproof protection while maintaining breathability for active outdoor use. The following sections detail the technical specifications, material composition, and functional design elements that define its performance in real-world environments.

Material Composition and Layer Structure

The jacket utilizes a proprietary three-layer laminate where the outer shell is made of 100% nylon with a耐磨 coating rated for 20,000 cycles Martindale abrasion resistance. The middle layer consists of a microporous PTFE membrane with a pore size of 0.2μm, blocking liquid water while allowing water vapor transmission at a rate of 15,000 g/m²/24h under ASTM E96 standards. The inner layer is a brushed polyester grid fleece weighing 80 g/m², designed to wick moisture away from the skin and reduce cling during prolonged wear.

Waterproof and Breathability Performance

Waterproof performance is validated through hydrostatic head testing, with a minimum rating of 20,000 mm H₂O before any leakage occurs, exceeding the threshold for prolonged heavy rain exposure. Breathability is measured via the sweating guarded hotplate test (ISO 11092), yielding a Ret value of less than 6 m²·Pa/W, indicating low thermal resistance to vapor transfer. These values ensure the jacket prevents external water ingress while facilitating internal moisture escape during moderate to high activity levels.

Design Features for Function and Visibility

The cream base color provides high visibility in low-light conditions such as dawn, dusk, or overcast environments, enhancing wearer detectability without relying on reflective tapes alone. Strategic color accents in safety orange and navy blue are applied to high-motion zones — shoulders, cuffs, and back yoke — to improve dynamic recognition during movement. Seams are fully sealed using 20mm wide polyurethane tape applied via heat bonding, ensuring 100% seam integrity under hydrostatic pressure. The hood features a three-point adjustment system with elastic cord locks and a laminated brim to shield precipitation from the face.

Fit, Mobility, and Ergonomic Considerations

The jacket employs an articulated sleeve pattern with underarm gussets to allow unrestricted arm elevation up to 180 degrees without hem lift or torso tension. The hem is adjustable via a dual-drawcord system with cord stops, enabling users to tighten the perimeter in windy conditions while maintaining compatibility with layered clothing underneath. Pit zippers are constructed from YKK® AquaGuard® coil zippers with storm flaps, providing ventilation access without compromising weather protection when closed. The interior includes two mesh-lined drop pockets and one internal zippered security pocket, all positioned to avoid interference with harnesses or backpacks.

Typical Applications and Use Cases

This jacket is suited for professionals and enthusiasts engaged in prolonged outdoor exposure where weather variability is expected, including field research, trail maintenance, outdoor education, and light-duty utility work in municipal or recreational settings. Its balanced waterproof-breathable profile makes it effective in temperate climates with frequent drizzle or intermittent showers, where fully insulated garments may cause overheating and non-breathable shells lead to discomfort from sweat accumulation. The color scheme supports both functional visibility and professional appearance in semi-formal outdoor roles.

Quality Control and Manufacturing Consistency

Each jacket undergoes inline inspection at critical stages: fabric roll verification for coating uniformity, membrane lamination integrity via peel strength testing (>8 N/cm), and seam seal continuity using electrical spark testing. Final random sampling includes hydrostatic head retest on finished units and spray testing per AATCC 35 to validate surface water resistance. Dimensional stability is assessed after five home laundering cycles (30°C, mild detergent) to ensure minimal shrinkage (<2%) and retention of functional properties. All processes follow ISO 9001-aligned procedures for traceability and repeatability.

Customization Options

Color placement of the accent panels can be adjusted to align with organizational branding or team identification schemes, subject to minimum dye lot requirements. Alternative outer shell materials, such as recycled polyester with equivalent abrasion resistance, are available upon request. Zipper types, pocket configurations, and hood stiffness can be modified based on specific operational needs. Sizing runs from XS to 3XL with optional tall and plus proportions; custom grading is possible for bulk orders with provided measurement charts.

Packaging and Shipping Considerations

Jackets are folded using a standardized tri-fold method to minimize creasing in high-flex zones and packed in individual polyethylene bags with desiccant packs to control moisture during transit. Master cartons contain 20 units, stacked flat to prevent deformation, and secured with polyester strapping. Each carton is labeled with SKU, size range, color code, and QR code linking to the product specification sheet. For export shipments, cartons are palletized and stretch-wrapped to ensure stability during long-haul transport, with corner boards added for edge protection.

Request Technical Specifications or Sample