B2B Fleece Lined Hooded Raincoat for Women

This industrial-grade raincoat is engineered for female personnel requiring reliable weather protection in demanding outdoor work environments. It combines a waterproof outer shell with a bonded fleece lining to maintain thermal comfort during prolonged exposure to wind, rain, and low temperatures. The design prioritizes functional integrity over aesthetic appeal, ensuring consistent performance across extended use cycles in sectors such as utilities, construction, logistics, and field services.

Material Construction and Layering System

The outer layer utilizes a 300D polyester oxford fabric with a polyurethane (PU) coating rated for 3,000mm hydrostatic head resistance, providing effective barrier performance against moderate to heavy rainfall. Seams are fully taped with waterproof tape to prevent leakage at stitch points, a critical detail often overlooked in consumer-grade alternatives. The inner fleece lining is a 200gsm anti-pill polyester fleece, thermally bonded to the shell to eliminate shifting or bunching during movement, ensuring consistent insulation retention even after repeated laundering cycles.

Unlike laminated systems that may delaminate under flex stress, this bonded construction maintains structural integrity across temperature fluctuations from -10°C to +30°C. The fleece does not absorb moisture, preserving its insulating properties when exposed to damp conditions, and dries rapidly when ambient humidity decreases. This material pairing avoids the bulkiness of separate liner systems while improving donning efficiency in time-sensitive operational scenarios.

Design Features for Operational Utility

The hood is integrated into the collar with a three-point adjustment system: drawcord at the perimeter, side tensioners, and a rear toggle, allowing secure fit over hard hats or helmets without obstructing peripheral vision. The brim is reinforced with a semi-rigid PE insert to maintain shape in wind, preventing water runoff into the face. Sleeve cuffs feature internal elastic gauntlets with external hook-and-loop closures, enabling a seal against wind-driven rain while accommodating gloves.

Two lower front pockets are positioned for access while wearing a harness or belt, with storm flaps covering zippered entries to prevent water ingress. The main front closure uses a YKK #5 coil zipper with a double storm flap and magnetic snap overlap, reducing reliance on zipper integrity alone for weatherproofing. A concealed interior pocket provides secure storage for radios or documentation, lined with anti-static fabric to prevent electrostatic discharge in sensitive environments.

Sizing and Fit Considerations for Female Users

The pattern is developed using female-specific anthropometric data, accounting for bust-to-hip ratio, shoulder slope, and torso length variations common in industrial workforces. Sizing ranges from XS to 3XL, with graded increments based on ISO 8559-1 standards. The cut allows for layering over mid-weight fleece or softshell garments without restricting mobility, particularly in the shoulder and scapular regions where overhead reach is frequent.

Back length is extended by 25mm compared to unisex equivalents to ensure coverage when bending or crouching, a common posture in maintenance and inspection tasks. The hem features a adjustable drawcord with cord locks, enabling users to tighten the silhouette in high-wind conditions to minimize heat loss and prevent the garment from billowing. All measurements are taken flat, with tolerance of ±1.5cm in critical dimensions such as chest width and sleeve length.

Performance Validation and Quality Control

Each unit undergoes hydrostatic testing post-assembly to verify shell integrity, with a minimum pass threshold of 2,500mm to account for real-world degradation from abrasion and flex. Fleece lining adhesion is assessed via peel resistance testing (ASTM D3930) to ensure bond strength exceeds 1.8 N/mm after 20 wash cycles at 40°C. Colorfastness to light and laundering is evaluated using AATCC standards, with ratings of 4 or higher required for approval.

Dimensional stability is monitored through repeated wash-and-dry cycles, with shrinkage limited to ≤3% in length and ≤2% in width. Functional testing includes zipper endurance (2,000 cycles), seam strength (minimum 14 N/mm), and abrasion resistance (Martindale ≥20,000 cycles). These benchmarks are internal standards derived from field failure analysis in similar protective apparel, not marketing claims.

Applications in Industrial Work Environments

This raincoat is specified for use in utility meter reading, where personnel operate in variable weather for extended periods, requiring both rain protection and thermal retention to prevent dexterity loss in cold, wet hands. In municipal road maintenance, it supports workers performing drainage inspection or signage repair during prolonged precipitation, where the hood’s helmet compatibility and storm flaps prevent water accumulation that could lead to chill or distraction.

Logistics and warehouse operations benefit from its use during loading/unloading in open bays or during transit between facilities, where sudden rain exposure is common. The anti-pill fleece maintains appearance and function despite contact with abrasive surfaces like pallets or conveyor belts. In telecommunications field services, the anti-static interior pocket accommodates radios without risk of interference, while the storm-flapped zippers prevent moisture from reaching sensitive electronics stored internally.

Customization Options for B2B Procurement

Shell fabric weight can be adjusted between 240D and 450D polyester oxford based on abrasion exposure expectations, with corresponding changes to PU coating thickness to maintain target hydrostatic head ratings. Fleece weight is scalable from 180gsm to 280gsm to match regional climate demands, with options for recycled polyester content upon request. Closure systems can be substituted with water-resistant zippers (e.g., YKK AquaGuard) or magnetic closures for specific hygiene or ESD environments.

Branding is available via screen printing or reflective heat transfer on the left chest, upper back, or sleeves, using inks certified for wash durability (minimum 50 cycles). Custom color matching to corporate palettes is possible with Pantone references, subject to minimum order quantities. Additional features such as internal ID badge loops, radio loops, or reinforced elbow patches can be integrated during pattern development, with engineering review to ensure no compromise to waterproof integrity.

All customization options are subject to technical review to ensure that modifications do not degrade the garment’s core performance characteristics, particularly waterproof seam integrity and thermal retention efficiency. Lead times for modified configurations typically range from 4 to 6 weeks, depending on complexity and material availability.

Request Technical Specification Sheet