Wholesale Rain Bucket Hat For Women
Wholesale Rain Bucket Hat for Women
Material Composition and Waterproof Performance
The hat body uses a 210T polyester pongee fabric with a polyurethane (PU) coating applied to the reverse side, providing a hydrostatic head rating of 3,000 mm. This specification indicates resistance to moderate rainfall without immediate saturation. Seams are sealed with ultrasonic welding rather than stitching to eliminate needle holes that could compromise waterproof integrity.
The brim incorporates a flexible polyethylene (PE) reinforcement layer measuring 0.8 mm in thickness, maintaining shape under wind load while allowing reversible folding for storage. The interior sweatband is made from recycled PET mesh with a moisture-wicking finish, tested to absorb 150% of its weight in sweat before saturation.
Structural Design and Functional Features
The bucket silhouette features a 7 cm downward-sloping brim angled at 15 degrees from horizontal, designed to divert rainwater away from the face and neck while preserving peripheral vision. Crown height measures 12 cm with a 6-panel construction, each panel cut on bias grain to accommodate head circumference variation without distortion.
An adjustable drawcord system runs through eyelets positioned 1 cm above the sweatband, allowing circumference adjustment from 54 cm to 60 cm. Cord stops are molded nylon with a coefficient of friction rated for 5,000+ adjustment cycles. Ventilation is provided by four 3 mm laser-drilled holes per side, placed under the brim overlay to prevent water ingress while enabling airflow.
Typical Applications in Commercial and Institutional Settings
These hats are specified for outdoor work crews in landscaping, municipal maintenance, and event staffing where prolonged exposure to intermittent rain is expected. The packable design supports inclusion in emergency kits for outdoor venues, with folded dimensions not exceeding 18 cm x 10 cm x 5 cm.
Educational institutions procure them for field trip programs in temperate climates, citing compliance with ASTM F1891 rain gear guidelines for head protection. Retail distributors note consistent demand during seasonal transitions, particularly in regions with >120 annual rainy days.
Customization Parameters for B2B Orders
Minimum order quantity for wholesale is 300 units per colorway. Fabric dye lots are controlled to Pantone TPX tolerances of ±2.5 for bulk consistency. Custom logos can be applied via screen printing on the left rear panel with a maximum print area of 60 mm x 40 mm, using plastisol inks rated for 50+ wash cycles at 40°C.
Brim stiffness can be modified by adjusting PE thickness between 0.6 mm and 1.2 mm upon request, affecting foldability and wind resistance. Sweatband alternatives include bamboo charcoal-infused polyester or closed-cell foam for enhanced absorption in high-humidity environments.
Quality Control and Packaging Standards
Each unit undergoes hydrostatic testing on three random samples per batch of 1,200, with acceptance criteria requiring no leakage at 3,000 mm pressure for 5 minutes. Visual inspection checks for coating uniformity, seam integrity, and drawcord functionality under 2x operating load.
Hats are packed in polyethylene bags (50 µm thickness) with desiccant sachets, then placed in export cartons measuring 40 cm x 30 cm x 50 cm (50 units per carton). Carton markings include ISO-compliant handling symbols and QR codes linking to batch-specific test reports.
| Parameter | Typical Value | Customizable Range |
|---|---|---|
| Hydrostatic Head | 3,000 mm | 2,000–5,000 mm (coating adjustment) |
| Brim Width | 7 cm | 5–9 cm |
| Adjustable Circumference | 54–60 cm | 50–64 cm (drawcord length) |
| Fabric Weight | 70 gsm | 60–90 gsm |
| Folded Dimensions | 18 x 10 x 5 cm | Application-dependent |
Procurement Considerations
Lead time for first production is 25–30 days after artwork approval and material confirmation, with repeat orders averaging 18–22 days. Sample availability requires 7–10 days for standard configurations; custom material trials add 12–15 days. FOB pricing is structured per container load, with LCL options available for orders under 1,000 units.
Technical datasheets, REACH compliance documentation, and test reports are provided upon request. Payment terms follow standard industrial practice: 30% T/T advance, balance against copy of bill of lading. For detailed specification sheets or to initiate a quotation, contact our technical sales team.