Lightweight Waterproof Jacket With Hood Mens
Lightweight Waterproof Jacket with Hood for Men
This jacket combines a three-layer laminate system with a waterproof breathable membrane rated at 15,000 mm hydrostatic head and 10,000 g/m²/24h moisture vapor transmission rate (MVTR). The outer shell uses 30D nylon ripstop with a durable water repellent (DWR) finish, while the inner layer features a micro-porous polyurethane film bonded to a tricot backing for comfort and durability.
The hood is adjustable via a single-hand drawcord system with cord locks and laminated brim reinforcement to maintain shape in high wind. Seams are fully taped with 15mm-wide polyurethane tape using heat-bonding technology to prevent leakage at stitch points. Zippers are YKK AquaGuard® coated with storm flaps backed by hydrophilic tape for additional water resistance.
Ventilation is managed through two underarm zippered vents with mesh lining and storm flaps, allowing airflow without compromising waterproof integrity. The jacket weighs approximately 280 grams in size M, measured on a calibrated scale excluding packaging. Packed size is 18 x 12 x 6 cm when compressed into the included stuff sack using roll-top closure.
Technical Specifications
| Parameter | Value | Test Standard |
|---|---|---|
| Fabric Weight (Outer Shell) | 30D nylon ripstop | ASTM D3776 |
| Hydrostatic Head | 15,000 mm | ISO 811 |
| MVTR (Moisture Vapor Transmission Rate) | 10,000 g/m²/24h | ASTM E96 BW |
| Total Weight (Size M) | 280 g | Internal scale calibration |
| Packed Dimensions | 18 x 12 x 6 cm | Measured flat |
| Hood Adjustment | Single-hand drawcord with cord locks | Design specification |
| Seam Taping | 15mm polyurethane tape | ISO 811 post-tape |
| Zipper Type | YKK AquaGuard® coated | Manufacturer spec |
Material Composition and Construction
The jacket employs a symmetrical three-layer laminate: outer shell (30D nylon ripstop, DWR-treated), middle layer (micro-porous PU membrane), and inner layer (brushed polyester tricot). The DWR finish is C6-based fluoropolymer, reapplicable after 10–15 wash cycles using mild detergent and low-heat tumble dry. The membrane contains 1.4µm pores, blocking liquid water while allowing sweat vapor to escape via diffusion.
Stress points at shoulders, elbows, and hem feature bar-tack reinforcement using 6.6 nylon thread. The hem is adjustable via a concealed drawcord with internal toggle and cord stopper. Cuffs use laminated neoprene strips with hook-and-loop adjustment for sealing against gloves or wrists. All components are selected for low-temperature flexibility down to -20°C.
Lining is omitted in the torso and arms to reduce weight and bulk; only the hood and collar contain brushed tricot for skin comfort. The stuff sack is made from 40D nylon with silicone coating for abrasion resistance and water repellency. Reflective logos are heat-transfer applied using 3M™ Scotchlite™ material for low-light visibility.
Applications in Industrial and Outdoor Environments
This jacket is designed for personnel requiring mobility and weather protection in variable conditions, such as field technicians, surveyors, logistics operators, and maintenance crews working in coastal, mountainous, or high-precipitation zones. Its low pack weight and compressibility make it suitable for inclusion in emergency kits or vehicle storage where space is limited.
The breathability rating prevents overheating during moderate activity (e.g., walking, climbing ladders, equipment inspection), while the waterproof rating sustains protection in prolonged rain or snowmelt environments. Unlike insulated shells, this model avoids thermal buildup during high-output tasks, reducing the need for layering adjustments.
Common use cases include offshore wind farm inspections, pipeline monitoring in tundra regions, urban infrastructure assessments during storm seasons, and forestry operations in humid climates. The hood design accommodates hard hats or helmets when adjusted fully, maintaining peripheral vision and rain deflection.
Customization Options
Standard color options include black, navy, and high-visibility orange (EN ISO 20471 compliant). Custom Pantone matching is available for orders exceeding 50 units, with dye lot consistency verified via spectrophotometer. Logo placement can be applied via screen printing, heat transfer, or embroidery on the left chest, right sleeve, or hood back.
Alternative outer shell materials include 40D polyester ripstop for increased abrasion resistance or 15D nylon for ultralight variants (reducing weight to ~220g). Membrane performance can be adjusted to 20,000 mm hydrostatic head or 15,000 g/m²/24h MVTR based on environmental demands. Hood volume and brim stiffness are modifiable for specific headgear integration.
Packaging can be customized to individual polybags, bulk cartons, or kitted with gloves and gloves. Lead time for standard orders is 3–4 weeks; custom colors or materials extend to 6–8 weeks. Sample units are available upon request with technical datasheet and swatch approval.
Quality Control and Testing
Each batch undergoes hydrostatic head testing on three random samples per 1,000 units using a calibrated water column tester. MVTR is verified via inverted cup method under controlled humidity (38°C, 90% RH). Seam tape adhesion is tested per ASTM D903 after 24-hour dwell time at 23°C. Colorfastness to washing and light is assessed per ISO 105-B02 and ISO 105-C06.
DWR durability is evaluated after 20 wash cycles using AATCC TM135 spray test, with a minimum score of 80 required for passing. Zipper functionality is checked for 50 open/close cycles under salt spray exposure (ASTM B117, 5% NaCl, 35°C). All measurements are traceable to NIST-toleranced equipment, with records retained for 36 months.
Final inspection includes dimensional checks (chest, sleeve length, trunk height) against tolerance charts (±1.5cm), visual defect scanning under 500 lux lighting, and functional testing of all adjustables. Non-conforming items are segregated and reworked or scrapped based on defect severity. No finished goods are released without a signed quality release form.