This jacket combines minimal weight with effective water resistance for industrial and field use. Designed for personnel requiring reliable protection during light to moderate precipitation without compromising mobility.

Constructed from a 2.5-layer nylon ripstop fabric with a hydrophilic polyurethane coating, the jacket achieves a hydrostatic head rating of 5,000 mm while maintaining a total weight under 200 grams in size M.

The outer shell uses 40d nylon ripstop yarns woven at 120 threads per inch, providing tear resistance exceeding 8 N in both warp and weft directions per ASTM D2261. This structure prevents small abrasions from propagating into larger failures during routine handling.

The polyurethane coating is applied at 12 µm thickness, creating a microporous structure that allows moisture vapor transmission of 8,000 g/m²/24h (ASTM E96) while blocking liquid water penetration. Breathability is further enhanced by underarm ventilation zippers with storm flaps.

Seams are sealed with 15mm wide thermoplastic polyurethane tape applied via hot-air welding, achieving a leak-free performance in ISO 811 testing. Tape adhesion exceeds 4.5 N/cm after 5 wash cycles at 40°C.

The hood features a three-point adjustment system: rear drawcord with cordlock, side velcro tabs, and a stiffened brim reinforced with 0.5mm polyethylene insert. This configuration maintains peripheral vision while deflecting rain away from the face during wind-driven conditions.

YKK AquaGuard® zippers with hydrophobic coating are used for the front closure and pocket entries, rated for 5,000 cycles without coating degradation. Zipper garages prevent chin abrasion and water ingress at the closure top.

Articulated elbows and gusseted underarms provide 120° range of motion without binding. The hem includes a hidden adjustable drawcord with barrel locks, allowing users to seal against drafts while wearing harnesses or tool belts.

Each jacket folds into an integrated stuff sack located in the left interior pocket, reducing packed volume to 100mm × 70mm × 40mm. The sack uses the same 40d nylon fabric with a polyurethane coating, ensuring it remains lightweight and moisture-resistant.

For bulk storage, jackets are packed in quantities of 25 per carton (380mm × 300mm × 250mm) using recycled corrugated cardboard with a 120gsm polyethylene inner liner to prevent moisture absorption during transit.

Field service technicians in telecommunications and utilities benefit from the jacket’s low profile when working in confined spaces or climbing structures, where bulkier rain gear could impede movement or snag on equipment.

Logistics personnel operating in outdoor sorting facilities or loading docks use the jacket during transient showers, as it can be donned or stored in under 10 seconds without interfering with barcode scanners or wearable computers.

Environmental monitoring teams deploying sensors in remote locations rely on the jacket’s durability and packability during multi-day excursions, as it adds negligible weight to carry systems while providing essential protection against unexpected weather changes.

Customization options are available for clients requiring specific color matching to corporate safety standards or integration with existing PPE systems. Minimum order quantities for modified specifications begin at 100 units.

All materials comply with OEKO-TEX® Standard 100 restrictions on harmful substances, and the manufacturing process follows ISO 14001 environmental management principles. Documentation including material safety data sheets and test reports is available upon request.