The OEM fleece lined puddle suit 3/4 is a specialized outerwear solution designed for industrial environments requiring protection against wet conditions, wind exposure, and prolonged cold exposure. This garment combines a water-resistant outer shell with a thermal fleece lining to maintain core body temperature while allowing freedom of movement during extended outdoor operations. Unlike standard rain gear, the 3/4 length design provides targeted coverage to the torso and upper legs without restricting mobility at the knees or ankles, making it suitable for tasks requiring frequent bending, climbing, or equipment handling.

Constructed for durability in demanding work settings, the suit features reinforced stress points at the shoulders, elbows, and seat areas using abrasion-resistant nylon overlays. The fleece lining is engineered to retain insulating properties even when damp, preventing rapid heat loss during intermittent exposure to moisture. Seams are sealed with thermoplastic polyurethane tape to eliminate water ingress at stitch points, a critical feature for maintaining protection in prolonged drizzle or light rain scenarios common in construction, utility maintenance, and agricultural workflows.

Sizing follows standard industrial workwear grading with adjustable cuffs and hem drawcords to accommodate layering underneath. The front closure uses a heavy-duty YKK zipper with storm flap and hook-and-loop closure to prevent wind penetration. Reflective trim is integrated along the shoulders and back for low-visibility conditions, meeting ANSI/ISEA 107-2020 Class 2 requirements for daytime and nighttime conspicuity when paired with compliant base layers.

The outer shell is manufactured from 100% polyester with a polyurethane coating, providing a hydrostatic head rating of 5,000mm—sufficient to resist light to moderate rain without leakage under typical industrial use conditions. This coating is applied via a solvent-free lamination process to maintain flexibility and prevent delamination after repeated flexing. The fabric weight is 180gsm, balancing durability with wearer comfort during extended shifts.

The inner lining consists of 280gsm polyester fleece with a anti-pill finish, measured to retain 85% of its insulating value after 50 wash cycles per ISO 6330 standards. The fleece features a brushed interior surface to enhance thermal retention through trapped air layers, while the exterior face resists snagging on rough surfaces. Combined, the shell and lining achieve a total thermal resistance (R-value) of 0.35 m²·K/W, suitable for ambient temperatures between -5°C and 5°C when worn with standard work underlayers.

All materials are OEKO-TEX® Standard 100 certified, confirming the absence of harmful substances that could cause skin irritation during prolonged wear. The suit is designed for machine washing at 40°C without compromising seam integrity or coating performance, supporting routine maintenance in industrial laundering environments.

The 3/4 length cut terminates just below the knee, offering protection to the quadriceps and femoral areas—regions prone to heat loss during prolonged standing or kneeling in wet conditions—while avoiding interference with boot tops or gaiters. This length reduces material weight by approximately 18% compared to full-length alternatives, decreasing fatigue during extended wear. Articulated elbows and gusseted shoulders allow unrestricted arm movement when operating controls, lifting tools, or reaching overhead.

Pocket configuration includes two chest pockets with water-resistant zippers, two lower hand-warmer pockets lined with fleece, and an internal security pocket for documents or electronics. All pocket flaps are angled to shed water and secured with hook-and-loop closures. The hood is adjustable via dual drawcords and features a stiffened brim to maintain visibility in rain, with a stowaway design that nests into the collar when not in use.

Ventilation is managed through underarm eyelets with corrosion-resistant brass grommets, enabling passive airflow without compromising water resistance. These vents are positioned to facilitate heat dissipation during high-exertion tasks while minimizing rain ingress. The suit’s total weight averages 680g in size L, contributing to reduced metabolic load during prolonged use compared to heavier insulated alternatives.

This suit is commonly specified for utility workers performing meter reading, line inspection, or substation maintenance in damp or drizzly conditions where full rain suits would cause overheating. The targeted insulation prevents excessive sweating during intermittent activity, reducing the risk of chill from damp clothing during rest periods. In agricultural settings, it supports livestock handlers and irrigation technicians who require mobility in muddy environments while needing protection from morning dew or light spray.

Construction teams use it during early morning or late evening pours when temperatures hover near freezing and precipitation is light, allowing workers to remain focused on precision tasks without the bulk of heavier gear. Transportation and logistics personnel involved in outdoor loading/unloading operations benefit from the suit’s ability to shed water quickly when moving between indoor and outdoor zones, minimizing wet transfer into vehicle cabins or warehouse spaces.

The fleece lining’s quick-dry properties reduce the time needed between shifts when garments are hung to air dry, supporting higher utilization rates in shift-based operations. Unlike non-breathable rain suits, the moisture-vapor transmission rate (MVTR) of 5,000 g/m²/24hr allows perspiration to escape, maintaining wearer comfort during extended wear cycles.

As an OEM product, the fleece lined puddle suit 3/4 supports multiple customization pathways to align with client branding, safety protocols, or operational specifications. Exterior fabric color can be adjusted from standard navy, black, or high-visibility yellow to match corporate identities or site-specific visibility requirements. Reflective trim width and placement are modifiable to meet varying regional safety standards beyond ANSI/ISEA 107-2020, such as EN ISO 20471 for European markets.

Closure systems can be adapted to include side-zip ventilation panels, magnetic storm flaps, or reinforced snap closures for environments where hook-and-loop fasteners may accumulate debris. Pocket layouts are reconfigurable—additional tool loops, radio holsters, or insulated beverage pockets can be integrated based on workflow analysis. For clients requiring enhanced durability, the outer shell can be upgraded to a 240gsm ripstop nylon with PU coating, increasing tear resistance by approximately 40% while maintaining similar weight characteristics.

Lining weight and composition are adjustable; clients may specify heavier fleece (up to 400gsm) for colder climates or opt for a mesh-backed liner in warmer regions to improve airflow. All customizations are subject to minimum order quantities and require technical review to ensure compatibility with seam sealing, trim placement, and overall garment performance. Prototyping and wear trials are available upon request to validate specifications before full production.

Each suit undergoes inline inspection during assembly, focusing on seam seal integrity, zipper alignment, and reflective trim adhesion. Seam tape is validated using a dyed liquid penetration test per ASTM D751 to confirm waterproofness at stitch lines. Fleece lining is checked for uniform pile height and absence of thin spots that could compromise thermal performance. Final random inspections include a spray test (AATCC 22) to verify surface water resistance and a thermal manikin assessment (when requested) to validate predicted insulation values under simulated wind conditions.

Production is conducted in facilities certified to ISO 9001:2015 standards, with traceability maintained for all raw materials from lot receipt to finished garment. Colorfastness is tested per AATCC 61 to ensure minimal fading after repeated washing, critical for high-visibility variants where color degradation could affect conspicuity. All units are packaged in individual polybags with desiccant packs to prevent moisture accumulation during transit and storage, particularly important for ocean freight or long-term warehousing.

Clients receive a product specification sheet detailing exact material batches, seam sealing methods, and trim specifications used in their order. This documentation supports internal quality audits and facilitates consistent reordering. For regulated industries, additional documentation such as material safety data sheets (MSDS) for coatings or compliance declarations for reflective materials can be provided upon request.

For technical inquiries, customization requests, or to discuss specific application requirements for the OEM fleece lined puddle suit 3/4, please contact our engineering team.