Children's Yellow Fisherman's Coat

This children's fisherman's coat is constructed from 100% polyester oxford fabric with a polyurethane coating, providing a hydrostatic head rating of 3000mm for water resistance and breathability of 3000g/m²/24hr. The bright yellow color (Pantone 109C) ensures high visibility in low-light conditions, meeting EN ISO 20471 Class 2 requirements for conspicuity when combined with reflective tape.

The coat features a detachable hood with adjustable drawcord and toggle, storm flap over the front zipper with hook-and-loop closure, and two lower patch pockets with drainage holes. All seams are taped with 20mm wide waterproof tape to prevent leakage at stitch points. The interior includes a mesh lining for airflow and a snap-fastened storm cuff at the wrists to seal out wind and spray.

Sizing ranges from 90cm to 150cm height in 10cm increments, corresponding to ages 2-8 years. Chest measurements vary from 56cm to 74cm, with sleeve length proportional to height. The coat is designed with a relaxed fit to allow layering over sweaters or fleece in colder conditions, and the length extends to mid-thigh for adequate coverage during active use.

Material Specifications

The polyester oxford shell provides abrasion resistance suitable for dockside, fishing, and coastal environments, with a Taber abrasion rating of 250 cycles before noticeable wear. The polyurethane coating remains flexible down to -20°C, preventing cracking in cold storage or winter use. Reflective tape is applied in accordance with EN ISO 20471 configuration requirements: vertical strips on torso and horizontal bands around sleeves and hem to ensure 360-degree visibility.

Care instructions recommend machine washing at 30°C on a gentle cycle, avoiding fabric softeners which can degrade the PU coating. Tumble drying is not advised; line drying in shade preserves coating integrity and colorfastness. The coat retains 90% of its original water resistance after 20 wash cycles under these conditions. Zippers are corrosion-resistant nylon with salt-spray rating of 120 hours per ASTM B117.

Applications and Use Cases

This coat is specifically designed for children participating in supervised marine activities such as small-boat sailing, kayaking, shore fishing, and harbor visits. The high-visibility yellow color combined with reflective tape increases detectability by vessel operators and shore personnel in fog, rain, or low-light scenarios, reducing the risk of accidental collision or oversight during group outings.

Beyond maritime use, the coat serves as reliable rain protection for school trips, outdoor education programs, and coastal field studies where weather exposure is prolonged. The breathable membrane prevents overheating during active play while maintaining dryness during precipitation. Parents and educators selecting this garment prioritize verified water resistance and conspicuity over fashion, making it a functional safety layer rather than a fashion item.

Distributors supplying marine chandleries, outdoor retailers, and school uniform providers note consistent demand during spring and autumn seasons when weather variability increases. The coat’s packability—achieved through lightweight construction (approximately 220g for size 120cm) and ability to compress into its own pocket—makes it suitable for inclusion in emergency kits or day-trip backpacks where space is limited.

Quality Control and Manufacturing

Each coat undergoes inline inspection during assembly, checking seam alignment, tape adhesion, and zipper function. Final audit includes hydrostatic head testing on three random samples per production batch of 500 units, with acceptance criteria requiring minimum 2800mm water resistance. Reflective tape retroreflectivity is measured using a retroreflectometer, with minimum values of 330 cd/lx/m² for white tape and 100 cd/lx/m² for yellow tape per EN ISO 20471.

Colorfastness to light and wash is verified using ISO 105-B02 and ISO 105-C06 standards, with ratings of 4 or better required for approval. The polyurethane coating is tested for adhesion strength (minimum 2.5 N/mm per ASTM D4541) and flexibility after cold exposure (-20°C for 4 hours followed by mandrel bend test). All materials are sourced from suppliers with Oeko-Tex Standard 100 certification to ensure absence of harmful substances.

Packaging consists of individual polybags with ventilation holes to prevent moisture buildup, packed in export cartons of 20 units each. Cartons are marked with size, color, care instructions, and country of origin. Lead time from order confirmation to shipment is typically 25-30 days for standard configurations, with sample availability within 7 days upon request.